Stainless Steel Flexible Capillaries for General Purpose
Stainless Steel Flexible Capillaries for General Purpose from Agilent Technologies
Agilent's flexible stainless steel capillaries are engineered and manufactured to the same quality standards as our columns and instruments, so you can protect the integrity of your results at every step of your LC flow path.
Stainless steel is ideal for most standard applications. Agilent’s 0.6 mm od flexible grade 316L stainless steel capillaries (chrome/nickel/molybdenum bearing grade) are much easier to handle than conventional, rigid 1.6 mm od capillaries.
- Buy
- Features
-
Stainless steel Applications - All capillary applications except where bio-inertness is required
- 1/32 in od designed for Agilent 1100 systems
- 1/16 in and 1/8 in od for most applications
Internal Diameter 0.075 mm0.12 mm0.17 mm0.25 mm0.3 mm0.5 mm0.61 mm0.93 mmPressure Limit 1200 bar pH Range 1-14 Comments - Flexible for easy routing
- Ready to use: cleaned and passivated to a high standard
- Pre-cut capillaries are optimized for the lowest internal volume
- Use pre-cut lengths to maintain zero-dead-volume performance
- Specifications
-
The table below will be your guide to identifying the proper specifications for your capillary. The fitting left/right indicates which fitting is used on both ends of the capillary.
Fitting Left/Fitting Right
Key Description W Swagelok + 0.8 mm Port id S Swagelok + 1.6 mm Port id M Metric M4 + 0.8 mm Port id E Metric M3 + 1.6 mm Port id U Swagelok union L Long X Extra long H Long head G Small head SW 4 mm N Small head SW 5 mm F Finger-tight V 1200 bar B Bio P PEEK - Literature
-
-
InfinityLab Supplies Brochure
Your essential resource for InfinityLab LC supplies
-
Agilent LC Capillaries Selection Guide
Contains information on choosing the correct capillaries for your Agilent LC system
-
InfinityLab LC Supplies Brochure
Consumable items for Agilent LC systems
-